How to check and change the DPI of a photo
See which DPI a picture has, set it to 300 for a print shop or an upload form, and know when the number alone is not enough
By Metin Ersoy · Updated November 10, 2026
What the DPI number means
DPI stands for dots per inch. A photo file stores its width and height in pixels, and next to that a small note: how many of those pixels should go into one inch of paper. A photo 3,000 pixels wide prints 10 inches (25.4 cm) wide at 300 DPI and 20 inches wide at 150 DPI. On a screen nothing changes — monitors show pixels, not inches.
So there are two separate questions: what DPI is saved in the file (easy to change) and does the photo have enough pixels for the size you want to print (only a bigger original can fix that).
How to check a photo's DPI
Windows. Right-click the file in File Explorer, choose Properties and open the Details tab. Under Image you find Horizontal resolution and Vertical resolution, for example 72 dpi or 300 dpi. If the line is empty, the file has no DPI saved.
Mac. Open the photo in Preview and choose Tools → Show Inspector. The first tab lists the DPI next to the size in pixels. Tools → Adjust Size shows the same value as Resolution.
In the browser. Choose the photo in Change image DPI: the list under it shows the size in pixels, the DPI saved now and how big the photo prints at that DPI. Nothing is uploaded.
Phones. The gallery apps on iPhone and Android show the size in pixels in the photo details but usually not the DPI. Use the browser method above if you need the exact value.
How to change it to 300 DPI
In the browser (any device, many photos at once). Open Change image DPI, choose JPG or PNG files, tap 300 DPI (or type another value) and download. The list shows the new print size in centimetres and inches before you save. Several photos come back as one ZIP.
Mac Preview. Choose Tools → Adjust Size, untick Resample image, type 300 in Resolution and save. With resampling off, the pixels stay as they are and only the print size changes.
Photo editors. In most editors the setting is under Image size or Print size. Turn off resampling (sometimes called Resample or Interpolation) if you only want to change the DPI; with it on, the program changes the pixel count too.
Paint on Windows and the built-in phone editors do not offer a DPI setting.
How many pixels you need for a sharp print
Use pixels = centimetres ÷ 2.54 × DPI. At 300 DPI:
| Print size | Pixels needed |
|---|---|
| 10 × 15 cm photo | about 1,181 × 1,772 |
| 13 × 18 cm photo | about 1,535 × 2,126 |
| A4 (21 × 29.7 cm) | about 2,480 × 3,508 |
| 35 × 45 mm passport photo | about 413 × 531 |
If the photo has fewer pixels, setting 300 DPI makes it print smaller than you wanted. Either print it smaller, choose a lower DPI and accept a softer print, or find a larger original. Photos sent through messaging apps are often shrunk, so the copy on the camera or phone that took the photo is usually the best source.
Common problems
The value goes back to 72 after editing. Many apps save a new file with their own default DPI. Change the DPI as the last step, after cropping and resizing.
The print shop says the image is low resolution. They mean pixels. Check the table above; to change the pixel size use Resize image, and keep in mind that enlarging does not add detail. For the pixel sizes of ID photos, see how to resize a photo to exact pixels.
The file is WebP or HEIC. These formats have no standard DPI field. Convert to JPG first with WebP to JPG or HEIC to JPG, then set the DPI.
Ready to try it? It is free and your file stays on your device.
Open Change image DPI