How to fix a faded old photo
Prints from the 70s, 80s and 90s lose contrast and turn yellow or red over time. Here is how to digitise them and bring back much of their depth at home.
By Metin Ersoy · Updated November 10, 2026
Step 1: Digitise the print
- With a scanner: scan at 600 dpi so you can print it again at a larger size later. Save as JPG or PNG.
- With a phone: put the print on a dark table by a window in daylight. Hold the phone straight above it, turn off the flash and tap the photo on the screen to focus. Take two or three shots and keep the sharpest.
- If the print is in a frame, take it out; the glass causes reflections.
Step 2: Straighten and trim
The edge of the table and a bit of the border are usually in the shot. Cut them away with Crop image, and if the print is sideways, turn it with Rotate image. Cropping first matters: a white border or dark table would confuse your eye while adjusting.
Step 3: Restore depth and colour
- Open Adjust image brightness and choose the cropped photo.
- Press Reset to original, then start with the settings below.
- Watch the live preview and change one slider at a time.
- Download the result. Your scan stays unchanged, so you can try again with different values.
| Print looks | Contrast | Brightness | Colour saturation |
|---|---|---|---|
| Washed out, grey, no depth | +30 to +50 | 0 to -10 | +10 |
| Strong red, orange or yellow cast | +25 | 0 | -20 to -40 |
| Pale, colours almost gone | +30 | 0 | +30 to +50 |
| Dark and muddy | +15 | +20 | 0 |
| Faded black-and-white print | +40 | -5 | -100 |
Contrast usually does most of the work with old prints. A slightly negative brightness helps the blacks look deep again after the contrast has lifted everything.
When colours cannot be saved
If the colours have shifted too far, turn the photo into a classic print with Black and white image. Grey gives a clean, timeless look, and Sepia gives a warm, old-photo tone that hides colour damage well. You can still raise contrast afterwards with the brightness tool.
Keep and share the results
- To put a whole album into one file for the family, use JPG to PDF; every photo becomes a page.
- To send them on a messenger without losing too much detail, shrink them a little with Compress JPG.
- Keep the original, unedited scans too. If better tools come along, you can start again from them.
If something goes wrong
The photo looks harsh after raising contrast. Contrast above +50 can cut off details in faces and skies. Go back to +30 and lower brightness a few steps instead.
There is a bright spot in the middle. That is a reflection from a glossy print. Photograph it again by a window, slightly tilted, without flash; the adjustment tool cannot remove a reflection.
Grain or paper texture became visible. Old prints have a fine surface pattern that contrast makes stronger. A slightly smaller contrast value, or a black-and-white version, makes it less noticeable.
Ready to try it? It is free and your file stays on your device.
Open Adjust image brightness