PDFVela — pdfvela.com

How do I print a large picture across several A4 sheets?

Make a wall poster or a banner on your home printer, without a print shop

By · Updated November 10, 2026

What you need

  • The picture you want to enlarge (a photo, drawing, map or lettering). The more pixels it has, the sharper the poster.
  • A home or office printer and enough A4 or Letter paper. Heavier 120–160 g/m² paper hangs flatter, but normal 80 g/m² paper works too.
  • Scissors or a craft knife, a ruler, and tape or glue.

1. Decide how big the poster should be

In Print image on multiple pages, choose your picture and type how many sheets you want side by side. The tool works out how many rows the picture needs, and the summary under the preview shows the finished size in centimetres.

A4 sheets across (portrait)Poster widthTotal sheets for a square picture
2about 38 cm4
3about 57 cm9
4about 76 cm12
5about 95 cm20

For a wide picture (a landscape or a banner), turning the sheets to landscape often needs fewer pages for the same width. If the picture is small for the size you chose, the tool warns you; use fewer sheets across.

2. Choose how to join the sheets

  • Edge to edge: Cut each sheet along the grey lines, lay them side by side and tape them from the back. Quick, but the cuts need to be straight.
  • 1 cm glue strip: Each sheet repeats the last centimetre of its neighbour. Trim one sheet's edge and lay it over the next one. Small cutting errors no longer leave a gap, which makes it the sturdier choice for a poster on the wall.

"Create poster PDF" downloads one PDF with one page per sheet.

3. Print with the right setting

This step decides whether the sheets line up.

  1. Open the PDF and bring up the print dialog (Ctrl+P on Windows, Cmd+P on a Mac).
  2. Check that the paper size matches the one you chose in the tool.
  3. Set the scale to "Actual size" or 100 %. Turn off "Fit to page", "Shrink oversized pages" and similar options.
  4. If your printer has its own "borderless" or "auto enlarge" setting, keep it off.
  5. Print only the first page, measure the picture area with a ruler, and print the rest once it matches.

Menu names differ a little between browsers, PDF apps and printers; what matters is that the pages are printed without being shrunk.

4. Trim and join

  1. Lay the sheets out by their labels: A1 top left, A2 to its right, B1 at the start of the second row.
  2. Cut the white margin off the right and bottom edge of each sheet along the grey line. Trim the outer edges of the last column and the bottom row too if you like.
  3. Join the sheets from left to right, then from top to bottom. With the glue strip, line the trimmed edge up exactly over the repeated strip of its neighbour.
  4. Tape on the back so the front stays clean.

Common mistakes

  • Not printing at 100 %: almost the only reason the edges do not meet.
  • Enlarging a tiny picture: images saved from a chat app or a web page look blurry at poster size. Use the original photo where you can.
  • Mixing up the sheets: lay them out by their labels before cutting, because the label is cut off with the margin.

If you only need equal image files rather than a print-ready PDF (for example for an Instagram grid), use Split image.

Ready to try it? It is free and your file stays on your device.

Open Print image on multiple pages

Printing a picture on several sheets — common questions

My printer cannot print borderless. Is that a problem?

No. The Print image on multiple pages tool leaves a 1 cm margin on every sheet, so no part of your picture falls in the strip the printer cannot reach. You trim this white margin away when you join the sheets.

What if I mix up the order of the sheets?

Every sheet has a small label such as A1, A2 or B1 in its bottom margin. The letter is the row (A is the top) and the number is the column (1 is the left). Lay the sheets out by their labels before you cut.

Why is my poster smaller than expected?

The "Fit to page" option was probably left on in the print dialog, so the printer shrank every page a little and the edges no longer meet. Set the scale to "Actual size" or 100 % and print again.

I only have a black-and-white printer. Will it work?

Yes, the picture simply comes out in shades of grey. Large dark or coloured areas use a lot of ink, so printing one test sheet before a big photo poster is a good idea.

Is my photo uploaded anywhere?

No. The tool cuts the picture into sheets and builds the PDF in your browser, on your own device; the file is not sent to a server.