PDFVela — pdfvela.com

How to make a scanned PDF smaller

A 4-page colour scan went from 12.8 MB to 1.3 MB in our test — here is how, and when to stop

By · Updated October 27, 2026

Why scans are so much bigger than other PDFs

A PDF made from a Word document stores letters as text: a full page of it costs a few kilobytes. A scan stores each page as a photograph. Scanners and phone scanning apps usually save at 300 dpi or more, in colour, and the photo also captures things nobody needs — the grey tone of the paper, faint shadows, tiny specks of dust.

In our test, four ordinary A4 pages scanned at 300 dpi in colour came to 12.8 MB. The same pages would be well under 100 KB as a typed document. That gap is what compression closes.

Shrink a scan step by step

  1. Remove pages you do not need first. Blank backs from double-sided scanning, cover sheets and duplicate pages each cost as much as a page full of text. Delete PDF pages is the quickest way. Fixing sideways pages with Rotate PDF at this point also saves you a second round later.
  2. Open Compress PDF and choose your scan.
  3. Pick Recommended and compress. In our test the 12.8 MB scan became 1.3 MB (90% smaller).
  4. Zoom into the result and read a few lines of the smallest print. If it looks good and the size fits, you are done.
  5. Only if a portal demands a very small file, go back and choose Strong. The same scan became 0.45 MB (96% smaller). Check again — this is where small print starts to blur.

Everything happens in your browser, so payslips, ID copies and medical letters never leave your device.

Which level for which purpose

What the scan is forLevelWhat happens to the pages
Archive or print laterDo not compress, or LightEvery image stays exactly as scanned
Email or an online applicationRecommendedAbout 150 dpi per A4 page — sharp on screen
Upload form with a strict limit (for example 500 KB)StrongAbout 110 dpi — readable, fine detail gets softer

Keep the original scan in a folder if the paper document matters. Compression cannot bring back detail once it has been removed, so it is better to compress a copy each time you need to send it.

Scan smaller from the start

The best way to get a small scan is to never make a huge one. If you can change the scanner or app settings:

  • Resolution: 200 dpi is plenty for reading and printing ordinary text. 300 dpi is only needed if the text is very small or you plan to run OCR on poor-quality originals.
  • Colour mode: choose grayscale for letters, contracts and forms without important colours. Use colour only for photos, coloured stamps or signatures in blue ink that must be recognisable as such.
  • One file per document: scanning a whole stack into one PDF is fine, but scanning twice "to be safe" doubles the size.
  • Phone apps: most scanning apps have a "document" or "B&W" filter that removes the paper texture. It looks cleaner and the file is far smaller.

Make the scan searchable too

A compressed scan is still a picture of text. If you want to search it, copy from it or let a screen reader read it, run it through OCR PDF. The order does not matter for the text layer: compression only re-saves the page images and leaves any text layer alone. Doing OCR first can give slightly better recognition, because the OCR engine sees the full-resolution page.

If the file is still too big

  • Check whether the portal really needs every page — many only want the signed page or the first page of an ID.
  • If the form allows several uploads, split the document with Split PDF.
  • Converting to black and white with Grayscale PDF helps printing more than size; do not rely on it to close a big gap.

For general advice on email attachment limits, see How to make a PDF small enough for email.

Ready to try it? It is free and your file stays on your device.

Open Compress PDF

Questions about shrinking scans

Will the scan still be readable after compressing?

With the Recommended level, yes — a scanned A4 page keeps about 150 dpi, which is sharp on screen and fine for ordinary printing. Strong goes down to roughly 110 dpi; text stays readable on screen, but fine print and stamps get softer, so zoom in and check before sending.

Can I search or copy text in the compressed scan?

Only if the scan had a text layer before. A plain scan is a picture of a page. Run OCR to add a text layer; compressing before or after OCR does not remove it, because only the page images are re-saved.

Should I scan in black and white to save space?

Choosing grayscale or black and white in the scanner settings can make the original much smaller. Converting an already-scanned colour PDF to black and white afterwards saves much less — in our tests only 0–10% on top of compression.

Why is my one-page scan over 3 MB?

The page is stored as one large photo, often at 300–600 dpi in full colour, including the texture of the paper. Every extra dot of detail costs space even when you cannot see it.